The Best GPUs for Mining by Profitability and Power Use
Compare the best GPUs for mining in 2026 by current profitability, power use, payback, VRAM, and algorithm fit before buying or building a rig.
The best GPU for mining depends on more than the largest hashrate number. The current rankings put the GeForce RTX 5090 at the top for displayed daily mining results, while the RTX 4090 and several RTX 40 and RTX 50 cards can offer a different balance of purchase price, power draw, and payback. A card that looks strongest on a live profitability table can still be a poor buy if its price, electricity use, or algorithm support does not fit your setup.
This comparison uses the supplied November 2026 mining snapshots to separate raw performance from practical value. It covers the leading cards, the numbers that matter before purchase, and a safer way to check whether a GPU can make sense at your electricity rate.
Which GPU is best for mining right now?
For the highest current displayed result, the NVIDIA GeForce RTX 5090 is the leading choice in the supplied WhatToMine ranking. Its table entry shows 415.00 Th/s on Pearl at 560 W, with $8.08 in revenue and $6.74 in profit per day under that page's displayed assumptions. The same row is marked as a limited, unverified result, so treat it as a live estimate rather than a guaranteed return.
The RTX 4090 is a more interesting value comparison. WhatToMine lists it at 330.00 Th/s and 370 W, with $5.54 in daily profit in the same ranking. The RTX 5080, RTX 4080 Super, and RTX 4080 follow with lower displayed daily results, but their power figures and street prices can change the calculation for a particular miner.
That means there are two useful answers to the question:
- Best for current displayed profitability: GeForce RTX 5090, subject to the ranking's unverified-results note and changing network conditions.
- Best candidate for a value-focused comparison: GeForce RTX 4090 or a lower-power RTX 40 or RTX 50 card, depending on purchase price and electricity cost.
These are starting points, not permanent winners. Mining revenue changes with coin price, network difficulty, block rewards, pool fees, and the algorithm selected by the GPU.
Best GPUs for mining ranked by current results
The following figures come from the supplied WhatToMine snapshot. They should be read as a comparison from one point in time, not as promises of future income.
| GPU | Listed hashrate and power | Listed daily profit | Best use of the result |
|---|---|---|---|
| GeForce RTX 5090 | 415.00 Th/s, 560 W | $6.74 | Raw performance screening, with the limited-result warning |
| GeForce RTX 4090 | 330.00 Th/s, 370 W | $5.54 | Comparing high-end performance with lower power than the 5090 |
| GeForce RTX 5080 | 210.00 Th/s, 220 W | $3.56 | Evaluating newer hardware with a lower listed power draw |
| GeForce RTX 4080 Super | 200.00 Th/s, 230 W | $3.34 | Comparing efficiency and purchase cost against newer cards |
| GeForce RTX 4080 | 190.00 Th/s, 230 W | $3.15 | Considering a discounted previous-generation high-end card |
The ranking also shows why a simple speed leaderboard is incomplete. The RTX 5090 has the strongest listed result, but its 560 W draw is substantially higher than the 220 W shown for the RTX 5080. A miner should compare the net result after electricity, not just the revenue column.
For a broader explanation of how to read hardware results without treating one chart as the whole answer, use this GPU benchmarks comparison before making a purchase.
Why the fastest mining GPU is not always the best buy
A mining GPU has at least four financial variables: acquisition cost, electricity, operating fees, and resale or replacement value. The fastest card can produce more cryptocurrency while also consuming more energy and costing more upfront. If those extra costs extend the payback period, a slower card can be the more sensible choice.
The supplied Kryptex snapshot demonstrates this difference. It lists the RTX 5090 at $234.36 per month with a 753-day payback, while the RTX 4090 appears at $201.19 per month with a 261-day payback. Those figures come from a different calculator and set of assumptions than the WhatToMine table, so they are not directly interchangeable. They are still useful as a reminder that monthly output and payback are separate measurements.
Before comparing cards, write down:
- The price you can actually pay for the card, including shipping and any required accessories.
- Your electricity rate in dollars per kilowatt-hour.
- The card's tuned power draw rather than only its factory rating.
- Pool, mining software, and exchange costs.
- Cooling, fan replacement, maintenance, and the likely resale value.
A one-day mining estimate should not be multiplied across a full year as if coin prices, difficulty, and rewards were fixed. Recalculate when network conditions or your electricity tariff changes.
What to check before choosing a mining GPU
Algorithm compatibility
Hashrate values from different algorithms cannot be compared as if they used the same unit of work. A card may be strong on one algorithm and much less attractive on another. Check the exact coin or mining service, algorithm, expected hashrate, power draw, and software support together.
The source comparisons list networks and algorithms including Pearl, QPoW, ProgPow, KawPoW, Autolykos v2, ETChash, ZelHash, FiroPoW, BeamHash III, and FishHash. That variety is why a general claim such as "this GPU mines at X" is incomplete without naming the workload.
Power efficiency
Power efficiency is often more useful than peak hashrate when electricity is expensive. A card with a lower hashrate can produce a stronger net result if it uses much less power for the same algorithm. Undervolting and tuning may improve the balance, but the final setting must remain stable and cool enough for continuous operation.
Keep the mining rig's other power use in the calculation too. Fans, riser cables, the motherboard, storage, and the power supply add to the wall draw. A calculation based only on the GPU can make the expected margin look better than it really is.
VRAM and memory requirements
VRAM matters when an algorithm requires a large working dataset. The supplied research notes that memory-heavy workloads can outgrow older cards even when their processors remain functional. It also identifies more than 6 GB as a current requirement for Ergo's Autolykos v2 setup, while BeamHash III is described as requiring at least 3 GB in its cited mining documentation.
Check the current requirements for the exact network before buying used hardware. More VRAM does not automatically make a card profitable, but too little VRAM can prevent it from running the workload at all.
Cooling and physical fit
Mining keeps a GPU under sustained load, unlike a short gaming benchmark. Case airflow, room temperature, fan condition, dust, and the spacing between cards all affect the practical result. A card that repeatedly throttles will not deliver its advertised hashrate, and a rig that runs too hot may need additional cooling that changes the budget.
Anyone comparing an RTX 4090 should also account for its RTX 4090 power draw, connector requirements, physical size, and cooling needs rather than judging it only by the mining table.
Drivers and software
Mining software support can change as algorithms and networks change. Keep an eye on GPU driver news, but do not assume that the newest gaming driver is automatically the best mining configuration. Test a stable driver, record hashrate and wall power, and keep a known-good configuration available before updating a working rig.
Which mining coins can use a GPU?
GPU mining remains tied to proof-of-work networks that support graphics-card workloads. The supplied research identifies Ravencoin, Ergo, Ethereum Classic, Flux, Firo, Beam, Iron Fish, and Neoxa as examples of networks with GPU-oriented algorithms or active GPU mining support. Their conditions are not equivalent.
Ravencoin uses KawPoW, Ergo uses Autolykos v2, Ethereum Classic uses ETChash, and Flux uses ZelHash. Firo, Beam, and Iron Fish use different GPU-focused algorithms, while Neoxa also uses the KawPoW family. Compare a GPU against the algorithm you intend to run instead of treating every coin as a generic mining workload.
Some popular networks should not be assumed to be GPU opportunities. Ethereum's move to proof-of-stake ended mining on that network, while specialized hardware has made GPU mining impractical at competitive scale for Kaspa. Monero's RandomX algorithm can run on a GPU, but it is designed around CPU mining. These distinctions can prevent an expensive mismatch between the card you buy and the network you want to use.
How to calculate whether a GPU is worthwhile
Start with a current calculator or mining pool estimate for the exact GPU and algorithm. Then subtract the following from expected revenue:
- GPU and rig electricity
- Pool fees
- Mining software fees
- Cooling and other operating costs
- Hardware depreciation and eventual replacement
For a basic electricity estimate, multiply wall power in kilowatts by 24 hours and by your electricity rate. For example, a system drawing 0.5 kW uses 12 kWh in 24 hours. The actual cost depends on the local rate. This example explains the calculation method, not a profitability result.
Next, compare the daily net result with the purchase price. Do not call the result a guaranteed payback period. Coin prices, difficulty, block rewards, pool luck, and resale prices can all change before the calculation reaches its target date.
Frequently Asked Questions
Is the RTX 5090 the best GPU for mining?
It leads the supplied current profitability table, with a listed 415.00 Th/s and $6.74 daily profit, but the row is marked as a limited, unverified result. Its 560 W listing and high purchase cost also matter, so it is best treated as the current raw-performance leader rather than an automatic best buy.
Is the RTX 4090 still good for mining?
The RTX 4090 remains a strong high-end candidate. The supplied ranking lists 330.00 Th/s at 370 W, and the Kryptex snapshot shows a shorter displayed payback than the RTX 5090 under its own assumptions. Check the card's actual price, power setting, cooling, and algorithm before buying.
Do I need the newest GPU to mine?
No. Newer cards can offer better performance or efficiency, but a used or previous-generation card may have a better purchase price and payback. Older hardware still needs enough VRAM, stable software support, and acceptable power efficiency for the selected algorithm.
Is GPU mining profitable for everyone?
No. Profit depends on electricity cost, hardware price, network conditions, fees, and maintenance. A calculator result is a time-sensitive estimate, not a promise. If electricity is expensive or the card is bought at a high price, mining can produce little or negative net return.
Conclusion
The best GPUs for mining in 2026 are not defined by one permanent leaderboard. The RTX 5090 currently leads the supplied raw-profitability ranking, while the RTX 4090, RTX 5080, RTX 4080 Super, and RTX 4080 offer different combinations of hashrate, power use, price, and payback.
Use the rankings to create a shortlist, then recalculate the exact card and algorithm at your electricity rate. A good mining purchase is the one that remains sensible after power, fees, cooling, hardware cost, VRAM, and changing network conditions are included.